Certificate Of Analysis

Test Report No.T51710233976TY Date: JUL 03, 2017 Page 4 of 6

Result Page:

Flammability Test (Clause 4.2)

Flammability Test on Solid

Sample Burning Rate (inch/sec)

EAS ACK CLASSIC ETCH A SKETCH NEN 6PKM03 DNI

Requirement:

A toy / component is considered a “flammable solid” if it ignites and burns with a self-

sustaining flame at a rate greater than 0.10 in/sec along its major axis.

DNI = Did Not Ignite

ASTM F963-16, Clause 4.3.5.1 – Heavy Elements in Paint/Similar Surface Coating Materials

Method: With reference to CPSC-CH-E1003-09.1

Analysis was performed by Inductively Coupled Plasma Optical Emission Spectrometer (ICP-OES)

Total Lead Content

Test Item(s) Lead (Pb)

MDL (ppm)

Total Limit (ppm)

Specimen Description

Alias

No.

Tracing

No.

Result(s)

(ppm)

1. Golden coating (Lettering) 1 1 ND

Note: -

ppm = parts per million

1% = 10000 mg/kg = 10000 ppm =10000 µg/g

MDL = Method Detection Limit

ND = Not Detected (lower than MDL)

As received, test portion of golden coating (Lettering) is(are) less than 10 mg, therefore such

component(s) was(were) not tested for certain migration elements, as specified in ASTM F963-16

Clause 8.3.3.6 (2) – Selection of Test Portions