Reference Guide Manual

Object Types 3
1.2 Analog Output Object Type
Analog Output: BACnet Properties List
Is the Object Type Proprietary?
No, compliant with Clause 12.3 of ASHRAE Standard BACnet 135-2004 document.
Does the Object Type contain any Proprietary Properties?
Yes, the "Analog_Output_BCID" property.
General Description of Object Type
Analog Output objects are only created by the Paradigm Central Control Server (P-CCS)
based on the LightDesigner configuration and may be used for generic user-defined analog
control of objects within a Paradigm system.
Each object instance for the specified "Object_Type" has an "Object_Identifier" that is
unique for the type and "Object_Name".
The BACnet object instance is managed by the P-CCS, based on the configuration using
Paradigm LightDesigner software. An "Analog Output" object is created for each "Fader"
object with functional assignment on the BACnet I/O panel within LightDesigner, up to a
maximum of 1000 objects.
The "Present_Value" property will always have the objects analog value represented as an
integer between the values of 0-255. The "Present_Value" is read-write and is changable
by the BACnet client.
The Analog Output "ETCBACnetCID" (Analog_Output_BCID) property will be provided a
value that is unique within the storage of the BACnet Interface device and the P-CCS
sub-system.
Property Identifier Property Datatype Property Brief Description
Object_Identifier BACnetObjectIdentifier Numeric code uniquely identifying this object
Object_Name CharacterString Alphanumeric string identifying this object
Object_Type BACnetObjectType Always: "ANALOG_OUTPUT"
Present_Value REAL Current real value of this analog object
Description CharacterString Alphanumeric description of this object
Status_Flags BACnetStatusFlags Always "{false, false, false, false}"
Event_State BACnetEventState Always: "NORMAL"
Out_Of_Service BOOLEAN Always: "false"
Units BACnetEngineeringUnits N/A
Analog_Output_BCID EtcBACnetCID Unique 16 byte identifier assigned by P-CCS