TM User Manual Revision B Copyright © 2014 Electronic Theatre Controls, Inc. All Rights reserved. Product i nformation and specifications subject to change.
Ta b l e o f C o n t e n t s Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Basic Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Install Lens Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Adjustments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Adjusting the yoke position . . . . . . . . . . . . . . . . . . . . . . .3 Setting the angle with the yoke . . . . . . . . . . .
Introduction The Source Four Mini LED has three available mounting options. The portable version includes a miniature C-clamp and yoke mounted driver. The canopy-and track-mount designs both include an integral driver. There are four lens tube sizes available for each mounting style; 19°, 26°, 36°, and 50°. Portable Canopy Track This manual covers the common features for all three versions of the Source Four Mini LED.
Basic Assembly Yoke Pattern Holder Slot Lens tube Shutter Barrel Color frame retainer clip Safety cable attachment point Color frame Beam focus knob Shutters x4 INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, EXPOSURE TO EXCESSIVE UV RADIATION, OR INJURY TO PERSONS IMPORTANT SAFETY INSTRUCTIONS WARNING - To reduce the risk of FIRE, ELECTRIC SHOCK, EXPOSURE TO EXCESSIVE UV RADIATION, OR INJURY TO PERSONS: 1) Do not touch hot lens, guard, or enclosure.
I n s t a l l L e n s Tub e A lens tube must be installed prior to use of the Source Four Mini LED. There are four lens tube sizes available; 19°, 26°, 36°, and 50°. Beam focus knob Step 1: Step 2: Step 3: Unscrew the beam focus knob from the loose lens tube. Slide the lens tube into the shutter barrel. Install the beam focus knob. Adjustments Adjusting the yoke position The Source Four Mini LED provides multi-positioning capabilities within its yoke for overall fixture angle.
L o c k i n g th e r o t a ti o n i n t h e c a n o p y a n d t r a c k - m o u n t v a r i a t i o n s Yoke lock Step 1: Step 2: Step 3: Note: Rotate the fixture into the desired position. Fixture will be prevented from rotating completely around to protect the wiring. Insert a 1.5mm Allen wrench into the small hole on the yoke lock. Turn wrench to tighten down the yoke lock. If installing with LSI (http://www.lightingservicesinc.com/) or Global (http://www.nordicaluminium.fi/en/index.
Shaping the Beam The beam can be shaped using the four shutters or with a pattern. The Source Four Mini LED has four shutters: left, right, top, and bottom. Each shutter can be pulled out or pushed in to create the desired beam shape. P a tt e r n P r o j e c ti o n The Source Four Mini LED has a pattern holder slot on the top side of the shutter barrel, in front of the shutter. It accommodates a E-size (37.5mm with a 25.4mm image area) pattern holder.
WARNING: Make sure the color frame is locked in position with the retaining clip. Note: The color frame should be inserted open side down. Step 1: Release the retaining clip by gently Retaining pushing it up. clip Step 2: Insert the color frame. Step 3: Lock the retaining clip by gently pushing it Color down. Frame Additional accessories are available for the Mini LED Holder that also fit into the color frame holder. Those accessories are top hat, short top hat, half hat, short half hat, and donut.
Cleaning the Glass Lens WARNING: Step 1: Step 2: Step 3: Step 4: Step 5: Do not use ammonia-based or other harsh commercial cleaners. Clean lens only as directed. Commercially available glass cleaning agents should be avoided as they may contain ammonia, other harsh chemical detergents, or abrasive agents. These cleaners may damage the glass surface and the Anti-Reflective coatings. Do not immerse or soak the glass in any cleaning solution. Remove the beam focus knob from the barrel.
Corporate Headquarters 3031 Pleasant View Road, P.O.
