User manual

3 Operation 62
Preset
Preset is the number of a Preset, whether it is a predefined or a custom color mix.
Step 1: On the Sequences menu, scroll to Preset and press [Enter].
Step 2: Selecting Preset on the Sequences Menu.
Step 3: Press [Up] or [Down] to set the desired Preset number.
Step 4: Press [Enter].
Step 5: Press [Down] to scroll to Link Time.
Link Time
Link Time is the length of time the fixture waits before moving from one Preset to the next.
The format is MM:SS. The default is 2 seconds.
Step 1: On the Sequences menu, scroll to Link Time and press [Enter].
Figure-3.26 Selecting Link Time on the Sequences Menu.
Step 2: Press [Up] or [Down] to set the desired time in minutes.
Step 3: Press [Enter].
Step 4: Press [Up] or [Down] to set the desired time in seconds.
Step 5: Press [Enter] to commit the values.
Sequences
Sequence: * 3
Status: Active
Rate: 100%
Step: 01
Preset: 1
Link Time: 00:02
Copy to Other Fixture
Sequences
Sequence: * 3
Status: Active
Rate: 100%
Step: 01
Preset: 1
Link Time: 00:02
Copy to Other Fixture