Manual

1 Unpack and Organize 3
Section 1
Unpack and Organize
The table below lists the parts and components needed to retrofit a Sensor touring rack
(SP48, 96, or 96 “Double Small”) to become a Sensor3 rack with a CEM3. Each part is
listed to reflect the different quantities for the different kits and types of racks.
Additional items listed on following page
Parts/Components
ETC Part Number
SP48 Kit
7143K1001
SP96 Kit
7143K1002
SP96
“Double Small”
7143K1003
Parts Included in the Kits
Beacon Cable Assembly
7050B7016
121
Touring Backplane Baffle
7053A3023
111
CEM3 SP DMX/Beacon Control Assembly
7142B5610
111
Sensor3 Touring Rack Door Label
7143A4119
111
SP48/96 Touring Rack Control Panel
7153A3001
11
SP9620 Double Small Touring Rack Control Panel
7153A3005
1
CEM Classic to CEM3 Backplane Power Adapter Harness
7141B7010
111
Sensor3 Rack Backplane Assembly
7142A2006-CFG
111
Sensor Touring Rack CEM Classic to CEM3 Retrofit Manual
7143M2310
111
16 pin power transition PCB
7150B4009A
111
Dimmer Output Upper Ribbon Card LF Assembly
7150B5607
122
Dimmer Output Lower Ribbon Card LF Assembly
7150B5606
122
Backplane DMX PCB Cable
7152B8001
111
Cat5e Cable RJ45/RJ45 UTP 2ft
N4035
111
Screw 8-32 X 3/8 Ph PH MS CP W/Patch
HW377
555
Cable tie 4" Hi-temp Black
HW7121
14 14 14
Ribbon Cable Clamp 1X1 White
HW726
888
CEM3 Backplane 1/8” #8 screw spacer
HW9343
555
Tie-mount (sticky-back)
HW741
444
Butt Splice 22-18GA Red
J4163
464
Heat Shrink 1-1/2” Black
W682
222