Owner's manual

1 Unpack and Organize 3
Section 1
Unpack and Organize
The table below lists the parts and components needed to retrofit a Sensor+ rack (SR+ or
HSR+ 6, 12, 24, or 48) to become a Sensor3 rack with a CEM3.
Parts/Components
ETC Part Number
SR+ Kit
7141K1101
HSR+ Kit
7141K1004
Parts Included in the Kits
Sensor Beacon Blue Assembly
7141B5109
11
Sensor3 Install Rack Door Label
7141A4001
11
CEM+ to CEM3 Backplane Power Adapter Harness
7141B7007
11
Sensor3 Install Rack Backplane Assembly
7141A2003-CFG
1
Sensor3 ESR/HSR Install Rack Backplane Assembly
7144A2000-CFG
1
Sensor Rack CEM+ to CEM3 Retrofit Manual
7141M2300
11
Screw 6-32 X 3/8 Ph PH MS CP W/Patch
HW222
33
Screw 8-32 X 3/8 Ph PH MS CP W/Patch
HW377
33
Cable tie 4" Hi-temp Black
HW7121
88
CEM3 Backplane 1/8” #8 screw spacer
HW9343
33
Tie-mount (sticky-back)
HW741
44
Additional Items
Additional
Line Items
Sensor3 AF Card (Optional)
7150B5623
up to 4*
CEM3
7140A1000
1
Required Tools
#1 Phillips screwdriver
#2 Phillips screwdriver
1/4” flat head screwdriver
Diagonal wire cutter
Permanent marker
Wire strippers