Manual

1 Unpack and Organise 3
Section 1
Unpack and Organise
The table below lists the parts and components needed to retrofit a CE Sensor rack
(ESR12, 24, 36 or 48) to become a Sensor3 rack with a CEM3. Each part is listed to reflect
the different quantities for the different kits and types of racks.
* Need/quantity based on specific rack type. For details contact ETC Technical Services (see Contacting ETC
Technical Services, page 1).
Parts/Components
ETC Part Number
ESR12 Rack
7144K1000
ER24-48 Rack
7144K1001
Parts Included in the Kits
Beacon Door Acrylic
7051A4116
11
CAT5 Termination Kit
4101A2003
11
Sensor3 Beacon Blue Assembly
7141B5109
11
Sensor3 Install Rack Door Label
7141A4001
11
8-pin Screw Terminal Data Connector
J3407-F
22
ECEM Classic to CEM3 Power Adapter Harness, ESR12
7144B7002
1
ECEM Classic to CEM3 Power Adapter Harness, ESR24-48
7144B7003
1
CE Sensor3 Install Rack Backplane Assembly, Sgl Height
7144A2000-CFG
1
CE Sensor3 Install Rack Backplane Assembly, Dbl Height
7144A2001-CFG
1
Sensor+/3 Filler Module
7150A3010
1
Sensor Rack CEM Classic to CEM3 Retrofit Manual
7144M2310
11
CAT5e Cable RJ45/RJ45 UTP 2ft
N4035
11
Screw 6-32 X 3/8 Ph PH MS CP W/Patch
HW222
33
Screw M4 X 10mm Ph PH MS W/Patch
HWM1346
33
Cable tie 4" Hi-temp Black
HW7121
28 28
CEM3 Backplane 1/8” #8 screw spacer
HW9343
33
Tie-mount (sticky-back)
HW741
14 14
Heat Shrink 1-1/2” x 4-1/2” Black
W682
22
Additional Items
Additional
Line Items
Sensor3 AF Card (for all AF racks)
7150B5623
up to 4*
CEM3
7140A1001
1