User Manual

1 Unpack and Organise 3
Section 1
Unpack and Organise
The table below lists the parts and components needed to retrofit a Sensor+ rack (ESR+12,
24, 36, or 48) to become a Sensor3 rack with a CEM3.
* Need/quantity based on specific rack type. For details contact ETC Technical Services (see Contacting ETC
Technical Services, page 1).
Parts/Components
ETC Part Number
ESR12+ Kit
7144K1002
ESR24-48+ Kit
7144K1003
Parts Included in the Kits
Sensor Beacon Blue Assembly
7141B5109
11
Sensor3 Install Rack Door Label
7141A4001
11
CEM+ to CEM3 Backplane Power Adapter Harness
7144B7001
11
Sensor3 ESR Install Rack Backplane Assembly
7144A2000-CFG
1
Sensor3 ESR Install Rack Backplane/NEFM Assembly
7144A2001-CFG
1
Sensor3 ESR CEM+ to CEM3 Retrofit Manual
7144M2300
11
Screw 6-32 X 3/8 Ph PH MS CP W/Patch
HW222
33
Screw 4-40x3/8 PhOHMS
HW171
2
Screw 4-40x3/8 PhOHMS
HW196
2
Cable tie 4" Hi-temp Black
HW7121
88
CEM3 Backplane 1/8” #8 screw spacer
HW9343
33
Screw M4x10mm Ph PH MS w/Patch
HWM1346
33
Tie-mount (sticky-back)
HW741
44
Wire Con 28-12GA 3 wire
J4629
33
Wire 22GA 300V Black - 200mm
W214
11
Wire 22GA 300V Red - 200mm
W216
11
Wire 22GA 300V Blue - 200mm
W237
11
Additional Items
Additional
Line Items
Sensor3 AF Card (Optional)
7150B5623
up to 4*
CEM3
7140A1001
1
Required Tools
#1 Phillips screwdriver
#2 Phillips screwdriver
1/4” AF nut driver or small adjustable spanner
6mm flat head screwdriver
Diagonal wire cutter
Permanent marker
Wire strippers