Instruction Manual

1 Unpack and Organize 3
Section 1
Unpack and Organize
The table below lists the parts and components needed to retrofit a Sensor rack (SR or HSR
6, 12, 24, or 48) to become a Sensor3 rack with a CEM3. Each part is listed to reflect the
different quantities for the different kits and types of racks.
* Need/quantity based on specific rack type. For details contact ETC Technical Services (see Contacting ETC
Technical Services, page 1).
Parts/Components
ETC Part Number
SR Rack
7141K1001
HSR Rack
7141K1003
Parts Included in the Kits
Beacon Door Acrylic
7051A4116
11
CAT5 Termination Kit
4101A2003
11
Sensor Beacon Blue Assembly
7141B5109
11
Sensor3 Install Rack Door Label
7141A4001
11
8-pin Screw Terminal Data Connector
J3407-F
22
CEM Classic to CEM3 Backplane Power Adapter Harness
7141B7010
11
Sensor3 Install Rack Backplane Assembly
7141A2003-CFG
1
Sensor3 ESR/HSR Install Rack Backplane Assembly
7144A2000-CFG
1
Sensor Rack CEM Classic to CEM3 Retrofit Manual
7141M2310
11
16 pin power transition PCB
7150B4009A
11
Dimmer Output Upper Ribbon Card LF Assembly
7150B5607
22
Dimmer Output Lower Ribbon Card LF Assembly
7150B5606
22
CAT5e Cable RJ45/RJ45 UTP 2ft
N4035
11
Screw 6-32 X 3/8 Ph PH MS CP W/Patch
HW222
33
Screw 8-32 X 3/8 Ph PH MS CP W/Patch
HW377
33
Cable tie 4" Hi-temp Black
HW7121
28 28
Ribbon Cable Clamp 1X1 White
HW726
44
CEM3 Backplane 1/8” #8 screw spacer
HW9343
33
Tie-mount (sticky-back)
HW741
14 14
Heat Shrink 1-1/2” Black
W682
22
Additional Items
Additional
Line Items
Sensor3 AF Card (Optional)
7150B5623
up to 4*
CEM3
7140A1000
1