User Manual

6 Net3 Two Port Gateway Setup Guide
Appendix A: Specifications
Net3 Two Port Gateway Control Features
• Distributes DMX over Ethernet
• Supports ETCNet2 and Net3/ACN protocols
• Distributes DMX data to any input/output device such as dimmers, scrollers, moving
lights and DMX consoles
• Modular DMX/RDM port design allowing easy configuration of port connector type and
replacement
• DMX512 via XLR 5-pin Male, XLR 5-pin Female connectors
• LCD screen for labeling, status and configuration indicators
• LED power and network indicators
• Supports Power over Ethernet (PoE) and an external DC power supply
• Versatile compact size
• Configurable via Network Configuration Editor software (NCE) or directly through ACN
Net3 Two Port Gateway Specification
General
• USITT DMX512/512A and ESTA ACN standards supported
• Supports ETCNet2 and Net3/ACN protocols
• ETL/cETL approved (Tested to UL Standards by ETL)
Network
• Complies with IEEE 802.3i for 10BASE-T, 802.3u for 100BASE-TX and 802.3af for
Power over Ethernet specifications
• Data transport utilizes TCP/IP suite of protocols
• Distributes DMX over Ethernet to any input/output device such as dimmers, scrollers,
moving lights
• 2048 DMX In or DMX Out channels
• Configurable to over 32,000 EDMX addresses (Running ETCNet2 software)
DMX Connections
•2 DMX ports
• Switch for DMX termination (internal access only)
• Connector options include:
• Two XLR 5-Pin Male DMX input connectors
• Two XLR 5-Pin Female DMX output connectors