User guide

RETURN TO FACTORY SETTINGS

ARE YOU REALLY SURE? [NO]

CANCEL SAVE

3. Use the rotary encoder to choose either YES (clears memory) or NO (no

action).

4 Press SAVE to leave the menu and reset the dimmer or CANCEL (to leave the

previous settings unchanged).

Factory defaults are:

AUTORELOAD: NO

CHANNEL CONFIGURATION: joined

CURRENT: 43A

CURRENT LIMITATION: off

CURVE LINear

DMX-1 ADDRESS: 001

DMX-1 BACKUP: all 00

DMX-1 FAIL: reset

DMX-2 ADDRESS: 000

DMX-2 BACKUP: all 00

DMX-2 FAIL: reset

DMX SYSTEM: individual

DMX MINIMUM RESET: off

FREQUENCY: 50Hz

LAMP SAVER ON

LAMP TUNING ON

LOAD SELECTION: all 2.5kW

MANUAL PRESETS: all 00

MAXIMUM: 100%

MINIMUM: 0%

MODE basic

NON-DIM (I/O) no

PASSWORDS: all 0000

PC ADDRESS: 00

PHASE off

PRESET-1: CH-1 @F only

PRESET-2: CH-2 @F only

PRESET-3: CH-3 @F only

PRESET-4: CH-4 @F only