Specifications

ETC Release Note:
Eos/Ion Software v1.4.0
Eos/Ion v1.4.0 Release Note Page 7 of 10 Electronic Theatre Controls, Inc.
Step 8: Click {Yes} to continue, click {No} to stop. The software will begin installing.
Step 9: When complete, the installer will offer a reboot. Leave the default selection of {Yes}
and click {Finish} to complete this part of the process. The console will reboot into
the Eos environment.
Offline Software
The offline software installers now include the drivers for ETC USB devices (such as fader wings).
When you first connect a USB device to your Windows
®
XP or Vista
®
PC, the “Found New
Hardware” wizard will appear and prompt you to install the drivers. Select the appropriate option
based on your operating system (see below).
XP - Select the “Install the software automatically (Recommended)” option. This should
appear in the second screen of the XP “Found New Hardware” wizard.
Vista - Select the “Locate and install driver software (Recommended)” option. This should
be the first screen of the Vista “Found New Hardware” wizard.
After completing the wizard procedure, the USB device should be operational with your PC.
Key-Cap Update
From Eos v1.3.1 to v1.4.0, two keys have been re-mapped and require that you change the
physical keys on the console keyboard to match the software.
Step 1: Use the key puller provided to remove the two keys shown below in the order
indicated below.
Step 2: Place the keys in their new correct locations and press them down firmly.
• “High/Low” replaces “Relate and “Fan” replaces the blank key.
Issues Corrected in v1.4.0
4019 SHELL - selected TimeZone does not always match the actual system TimeZone
Workaround: Set the timezone, and then ignore what the shell shows as the system timezone
4003 Hue does not wrap in absolute effect
3954 Loading a show should not affect parked levels
3944 [Chan 1 Mark Enter] isn't removing dark NI moves
3943 Effects [ExitTime Enter] should cause effect to use cue time for exit
3935 Marked parameters should mark in previous cue if the mark becomes broken.
3924 Cannot connect and install a USB device (wing) on a Vista offline machine
3917 Next/Last should not include channels outside of your partition
This is the correct final
position for the keys.
“High/Low” replaces “Relate”.
“Fan” replaces blank.
Remove the keys in the order shown
by the numbers next to each location.
12
Below is the correct orientation to use
the key puller for these keys.
Remove “Relate” and the adjacent
blank key.