User Manual

4 HQ-100 Performance Hazer User Manual
WARNING: Note the following safety warnings before use:
•
This device is designed for operation by qualified personnel only.
•
Replace the fuse with the specified type and rating only. See page 18 .
•
Make sure that the available voltage is within the stated range. See
page 10 .
•
Do not mount on or near flammable surfaces.
•
Do not operate near flammable materials or gases.
•
Not for residential use.
•
Use only in well-ventilated areas.
•
Do not place hands, face, or other body parts near the heat exchanger
or output nozzle during operation.
•
Do not use if the power lead (cord set) is damaged. If the lead is
damaged, it must be replaced by a qualified technician with an
equivalent type before use. Contact your local authorized dealer for
spare power leads.
•
The device must be plugged into a grounded outlet. Follow national
and local codes.
WARNING: RISK OF ELECTRIC SHOCK!
•
Do not remove the covers of the hazer.
•
Disconnect the device from power and DMX and allow it to cool before
performing any cleaning and maintenance.
CAUTION: Hot Surfaces. Allow the device to cool completely before
handling and servicing.