User Manual
Table Of Contents
Error Codes 15
Error Codes
The HQ-100 Performance Hazer will stop functioning if one of the following error messages is
displayed on the LCDtouchscreen.
Error Cause Remedy
Heater Fault The heater is not functioning.
Contact Technical Services (see
page 2
).
Heater
Overheated
The temperature of the heater is too high.
Let the hazer cool before
continuing use.
Thermocouple
Fell Off
The temperature of the heater cannot be
detected.
Contact Technical Services (see
page 2
).
Thermocouple
Polarity Reversed
The thermocouple cannot get an accurate
temperature reading for the heater, and the
heater could overheat.
Contact Technical Services (see
page 2
).
Wrong Voltage
The hazer is connected to the wrong power
source, which could damage the hazer.
Disconnect from power, inspect the
hazer for damage, and connect to
a 120 V power source.