User Manual

10 HQ-100 Performance Hazer User Manual
Power
Electrical Specifications
•
100–120 VAC at 50/60 Hz
•
Maximum power consumption: 800 W
Input and Power Factor
VAC Amps Hz Watts VA PF
100 5.40 50 536 540 0.99
120 6.55 60 782 785 0.99
CAUTION: Using the hazer below 100 V on a 15 A breaker may cause the
breaker to trip. Ensure that the circuit can handle the hazer's maximum
current draw before you connect it.
Connect Power
1. Connect the powerCON True1 connector on the power cord to the POWER IN receptacle
on the hazer.
2. Plug the other end of the power cord into a grounded electrical outlet.
3. Set the power switch to the on position. The hazer begins its warm-up process.
Power Multiple Devices
If you are connecting additional devices in a power run, link the remaining devices by
connecting a power cable from the POWEROUT connector on the hazer to the POWERIN
receptacle of the next device in the power run.
Power
source
Power out to the next device
POWER DMX
IN OUT INOUT
OFF
RESET
•