User Manual

8 HQ-100 Performance Hazer User Manual
6. Attach the quick disconnect fitting on the haze fluid hose to the quick disconnect socket
on the tank filter cap.
7. Retain the empty fluid tank for use when flushing the fluid lines.
Attach the Yoke
The HQ-100 Performance Hazer ships with a yoke for use when mounting the hazer overhead.
The rubber washers and T-handle bolts are included in the accessories bag.
1 2 3
1. Remove the adhesive from the back of a rubber washer, center the washer over the screw
hole on one side of the hazer, and press firmly to affix the washer to the hazer. Repeat to
affix the second washer to the other side of the hazer.
2. Position the yoke over the hazer and align the mounting holes on the yoke with the screw
holes on the sides of the hazer.
3. Screw the T-handle bolts into the sides of the hazer to secure the yoke to the hazer.