User Manual

3 Programming 42
When “Automatic is selected:
Scroll to “Apply and Exit”, then press enter ( ). The display returns to the Network
Settings menu.
When “Manual” is selected:
Press enter ( ) to manually select each of the IP Address settings. By default, the manual
IP settings for the Echo ACP are: IP Address 10.101.166.101, Subnet Mask 255.255.0.0,
and Gateway 10.101.1.1.
a: Scroll to “IP Address” and press enter ( ). The selection changes to the
first octet of the IP Address. Use the numeric keypad to specify the first
numeric octet, then press enter ( ). Repeat for each octet of the IP
Address.
b: Scroll to “Mask” and press enter ( ). The selection changes to the first
octet of the Subnet Mask. Use the numeric keypad to specify the first
numeric octet, then press enter ( ). Repeat for each octet of the Subnet
Mask.
c: Scroll to “Gway” and press enter ( ). The selection changes to the first
octet of the Gateway. Use the numeric keypad to specify the first numeric
octet, then press enter ( ). Repeat for each octet of the Gateway Address.
d: Scroll to “Apply and Exit”, then press enter ( ). The display returns to the
Network Settings menu.
sACN Universes
Step 1: Use the touch wheel to scroll to “sACN Universes” and press enter ( ). The
sACN Universes menu displays.
Step 2: Scroll to select the Universe for editing and press enter ( ).
Step 3: Use the numeric keypad or scroll wheel to specify the sACN universe number
between 1 and 63999, then press enter ( ) to set.
Step 4: Repeat for each Universe available as control input into the Echo ACP, up to four
universes total.
Step 5: Press the back ( ) button to set the values and return to the Network Settings
menu.
Note:
When “Automatic” is the selected IP Addressing mode, the IP Address, Gateway
and Subnet Mask fields do not display. To identify the current IP Address,
reference the Arch Control Status Display.
Note:
An sACN universe entered as “0” will display as “-” in the sACN Universes display
to indicate the universe is unused.
sACN Universes
Universe A: 1
Universe B: -
Universe C: -
Universe D: -
Configure up to four streaming ACN (sACN) universes for input
patching to the circuits in the enclosure. sACN universe 1 is
associated by default.