Tus neeg siv phau ntawv

ETC Installation Guide
ColorSource PAR v1.7/v3.0
Data Loss Behavior
When DMX data is lost, the fixture does one of the following actions:
•
If you selected a preset or sequence, that preset or sequence
automatically plays.
•
If no preset or sequence is active in the background, the fixture goes
dark and the DMXstart address flashes on the user interface.
Lock the User Interface
After you have set up the fixture, you can lock the user interface to prevent
additional changes.
1. Press and hold the
Up button and Down button simultaneously for
3seconds. The display will show
Loc to indicate that the user interface is
locked.
2. To unlock the user interface, press and hold the
Up button and Down
button simultaneously for 3 seconds.
ColorSource PAR Page 8 of 16 ETC