Tus neeg siv phau ntawv

ETC Installation Guide
ColorSource PAR v1.7/v3.0
Power thruPower in
Data in Data thru
Mode Up and Down
User interface
Power Up
Press any button to wake the display. The display shows the DMX address.
See
Set the DMXAddress below .
You can press the Mode button to access the Presets/Sequences menu. See
Play Presets and Sequences on page9 .
Adjust the Tilt
The fixture can be tilted up and down and rotated (panned) as needed.
1. Loosen, but do not remove the yoke locking knob.
2. Tilt the fixture to the desired angle.
3. Tighten the yoke locking knob.
Set the DMXAddress
1. Press any button to wake the display. The display shows the DMX
address.
2. Use the
Up and Down buttons to select the DMX address for the fixture.
You can also use RDM for DMX addressing. See RDM Values on page14 .
ColorSource PAR Page 6 of 16 ETC