Setup Guide User Manual

ETC Setup Guide
Congo Light Server
Congo Light Server Setup Guide Page 3 of 3 Electronic Theatre Controls, Inc.
Connector Pinouts
Operation Overview
Backlit indicators identify the operating status of the light server.
LEDs indicate which mode the unit is operating (server, backup, client) and the status of the operation
(master, backup sync or offline).
• The “Server” LED will illuminate when the unit is configured as a server.
• The “Backup” LED will illuminate when the unit is configured as backup.
• The “Client” LED will illuminate when the unit is configured as a client.
• The “Master” LED will illuminate when the unit is controlling the lighting system, and will blink
when the Backup is in control.
• The “Sync” LED will illuminate when the unit is synchronized with a server and will blink when the
connection to the server has been lost.
• The “Offline” LED is illuminated when the unit is running offline.
20 command keypad buttons are configured for single Congo commands.
The 20 command buttons are set to default button assignments for optimal operation. Press and hold
the [Shift] button to select the alternate function of any button (for example: [Shift] [1] to Escape).
USB port is provided for easy show loading to or from a USB storage device.
Push
1
2
3
4
5
1
2
3
4
5
6
7
8
15
14
13
12
11
10
9
Ground
Ground
+ 12Vdc
+ 12Vdc
S1
S2
S3
S4
Relay Out, Normally Closed
Relay Out, Normally Open
Relay Out, Common
8 7 6 5 4 3 2 1
15 14 13 12 11 10 9
Pin Use
1 Common (shield)
2Data -
3Data +
4 no connection
5 no connection
Remote Trigger
connector pinout
DMX 512
connector pinout
.
Server
Backup
Client
Master
Sync
Offline
1
23
45678
90
Esc



Mod
Ins
Live
Frmt
Tab
Brws
Macro
LdPly
ShiftC
Rec
GoBaMast Pause
Outp
Go
GoTo
@
+
DelCh
Thru All
removable label
strip
20
command
keypad buttons
backlit
indicators
USB
Soft Power
Switch