Data Sheet

ETC
ColorSource Series
ColorSource Spot jr
9
ADDITIONAL ORDERING INFORMATION
Fixture Accessories
MODEL DESCRIPTION PART NUMBER
400CC C-clamp 7060A2009 (not CE)
400SC Safety cable 7060A1022
DPSJ-X 25 ft powerCON-to-Edison input power cable with inline switch 7400B7030 (not CE)
CSSPOTJRAH ColorSource Spot jr accessory holder PSF1181
CSSPOTJRAH-1 ColorSource Spot jr accessory holder, white PSF1181-1
CSSPOTJRTH ColorSource Spot jr top hat PSF1182
CSSPOTJRTH-1 ColorSource Spot jr top hat, white PSF1182-1
CSSPOTJRHH ColorSource Spot jr half top hat PSF1183
CSSPOTJRHH-1 ColorSource Spot jr half top hat, white PSF1183-1
CSSPOTJRMH ColorSource Spot jr media holder PSF1184
CSSPOTJRMH-1 ColorSource Spot jr media holder, white PSF1184-1
CSSPOTJRDN ColorSource Spot jr donut PSF1185
CSSPOTJRDN-1 ColorSource Spot jr donut, white PSF1185-1
CSSPOTJRPH ColorSource Spot jr gobo holder 7416A1301
CSSPOTJRAK ColorSource Spot jr Accessory Kit
(gobo holder, smooth wash diffuser (in gate), accessory holder, media frame)
7416K1001
CSSPOTJRAK-1 ColorSource Spot jr Accessory Kit
(gobo holder, smooth wash diffuser (in gate), accessory holder, media frame), white
7416K1001-1
Power Input Cables
Use information below to order 5 ft power input leads with factory-fitted connectors. CE fixtures ship with powerCON to bare end cables in the box.
MODEL DESCRIPTION PART NUMBER
DPA-A 5 ft powerCON to parallel blade U-ground (Edison) connector 7410B7037-A (not CE)
DPA-B 5 ft powerCON to 20 A two-pin and ground (stage pin) connector 7410B7037-B (not CE)
DPA-C 5 ft powerCON to grounded 20 A twistlock connector 7410B7037-C (not CE)
DPA-X 5 ft powerCON to bare-end power input lead 7410B7037-X (not CE)
Power Thru Jumpers
Note: Power thru jumpers connect to a fixture’s output (thru) connector to provide a link to successive fixtures.
MODEL DESCRIPTION PART NUMBER
DPJ-5 5 ft powerCON-to-powerCON
fixture-to-fixture jumper 7410B7020 (not CE)
DPJ-10 10 ft powerCON-to-powerCON
fixture-to-fixture jumper 7410B7010 (not CE)
Diffusers
The Soft Focus Diffuser fits into a standard M-size pattern holder and delivers beautiful, homogenized light. You can also use the Soft Focus Diffuser with patterns for dappled
and soft-edge projections.
MODEL DESCRIPTION PART NUMBER
CSSPOTJRD ColorSource Spot jr in gate smooth wash diffuser 7416A4025