Data Sheet

ETC
ColorSource Series
ColorSource Spot jr
2
PRODUCT SPECIFICATIONS
Source
LED details 52 Lumileds LUXEON
®
C LED
Max lumens Standard: 5,708
Deep Blue: 5,426
Max lumens per watt 44.8
L70 rating (hours to 70%
output)*
>54,000 hours (both variants)
Color
Colors used Standard: Red, green, blue, lime
Deep Blue: Red, green, indigo, lime
Color temperature range Color mixing
Calibrated array Yes
Red shift No
Optical
Beam angle range Built in 25-50 degree zoom
Gate size 50 mm
Aperture size 6.25”-14”
Pattern projection Yes
Pattern size M (OD 66 mm, ID 48 mm), up to
2.03 mm (0.080 in) thick
Camera flicker
control/Hz range
1,200 Hz (default) and 25,000 Hz (via
RDM)
Control
Input method DMX512 via 5-pin XLR
Protocols DMX512/RDM
Modes (footprint) 4 modes, see page 10
RDM configuration Yes
UI type Seven-segment, three-button interface
Local control Yes
Onboard presets Yes (12)
Onboard sequences Yes (5)
Onboard effects No
Fixture-to-fixture control Yes
Notes 15-bit virtual dimming engine
Electrical
Voltage range 100–240 VAC 50/60 Hz
Input method powerCON power in and thru
Inrush 35 A at 120 V (First half-cycle)
45 A at 240 V (First half-cycle)
Fixtures per circuit 7 fixtures (15 A power thru
connector) or 8 fixtures (R20 module
or similar)
Wattage typical/standby 166 W / 2.6 W at 120 V
162 W / 2.0 W at 240 V
Current draw 1.59 A at 120 V
0.87 A at 240 V
Thermal
Ambient operating temp 0°–40° C (32°–104° F)
Fan (controllable) Yes (no)
Droop compensation Yes
dB range Pending
BTUs/hour 549
Physical
Materials ABS plastic
Color options Black or white
Mounting options Yoke
IP rating IP20
Weight 5.4 kg (12 lb)
Included accessories Hanging yoke, 1.5 m power cable
Notes See page 9 for power cable options
Warranty
Fixture 5 years
LED array 10 years
Regulatory and Compliance
Approved regulatory
standards
cETLus Listed
Conforms to UL 1598 Listed
Certified to CSA C22.2 No. 250 Listed
CE Compliant
*Note about LED luminaire lifetime:
For information on lifetime testing, visit: etcconnect.com/About/News/ETC-Fixture-Ratings-and-Warranties-Extended.aspx.
All LED sources experience some lessening of light output and some color shift over time. LED output will vary with thermal conditions. In
individual situations, LEDs will be used for different durations and levels. This can eventually lead to minor alterations in color performance,
necessitating slight adjustments to presets, cues or programs.