Manual

Cobalt 7.1 - 20140612
821
Please note that some settings will make other settings invalid - for example, if you set a master to
Inhibit, the main function will be inhibit.
Function Function
Mode Inclusive = playback interacts with other playbacks
Inhibit = fader limits the output of the preset ch's
Exclusive = fader "owns" preset intensities
Exclude Int from Record Excludes intensity from this master from recording
Master button Default = Select channels in preset as group
Start = Toggles fader to full/zero
Execute Attributes = Only executes attributes
Flash = Flashes the content
Include intensity Playback will control intensities
Attributes follow fader Playback fader will control attributes
Fader type Add = Adds intensities HTP
Solo = Replaces the content of all other masters
Fader: Use time Fader will never fade faster than the fade time
Return to (FCB) Specifies where attributes return to when the fader is
faded down
Off = No return target
Previous = Status before the fade
Preset = To a specified preset
MainPB = To the preset in A of the main playback
Preset Return to preset, if selected in previous choice
Active Parameter Lock Attributes can not be stolen by any other playback.
Manual override is possible.
Flash button Off = No function
Momentary = Flash when pressed
Latching = Toggles flash off/on
Flash type Add = Adds intensities HTP
Solo = Replaces the content of all other masters
Flash mode All = Intensities and attributes
Intensity = Intensities only
Attributes = Attributes only
Flash: Use time Flash will use master time
Flash Level Sets the target level for flash