Manual

Cobalt 7.1 - 20140612
803
will follow the fader
Execute at #% = attributes are
executed when the fader passes #%.
Active parameter
lock
Preset, effect Attributes cannot be stolen by
another master or the Main
Playback. Manual control is still
possible.
Return to (FCB) Preset, effect Defines what attributes will return
to at fade down.
None
Previous = last LTP values
Preset = a specified preset
Main Pb = sequence step in A
Preset Preset, effect Return to preset (see above)
NOTE
If several masters have Fade type = Solo, the last Solo master that leaves its
0% position will have priority over the other Solo masters. To take control
with another Solo master, move it down to 0% and up again.
Flash settings
The flash button is the lower key in all master modules. Some modules and the large Cobalt only have
flash keys for the lower row of faders. The different modes apply to specific content types - which is
described in greater detail in the tables below.
Flash Button
Mode Applies to Feedback
Off - Flash button is disabled
Momentary Ch, group, preset,
effect, chase, Sequence
Sets the fader to full or the defined
flash level when pressed and returns
the fader to zero when the key is
released.
Latching Ch, group, preset,
effect, chase, Sequence
Toggles the fader to full or the
defined flash level when pressed,
leaving the fader at that level until
the flash key is pressed again
GoBack Chase, Sequence GoBack to previous step
Tap Chase Sets tap tempo