Manual

Cobalt 7.1 - 20140612
287
NOTE
The Output List is divided into DMX universes. Open each from the Browser
>Patching >Output List >Universe #
Output List - Columns & Functions
Column Input Function
Output (EDMX)* No input The number of this Output (and EDMX) -
cannot be edited here.
Channel 0-3072 Enter the number, followed by MODIFY.
Proportion 0-100% Sets a proportional scaling factor for the
intensity of this output (channels can be
scaled in the Channel List).
Curve dropdown Shows the output curve. See Dimmer
Curves.
Device Info No Input Shows the moving device template and
parameter assigned to this output. Cannot be
edited - see Device Settings.
Park 0-100% Shows the level an output is parked at. Set a
level with # MODIFY and remove with C &
MODIFY. See Park.
*Output Lists show EDMX numbers in ( ) after the offset.port numbers in the first column. This is a
direct translation of EDMX values calculated using the EDMX Start value in the Settings dialog
(Cobalt output 1.1 = the EDMX Start number, and all subsequent outputs are calculated from there).