Manual

Cobalt 7.1 - 20140612
278
address.universe. You can change universe
by ".universe"
Inv. Pan Off/On You can invert pan for this device on the
input (manual control) or output (stored
data)
Inv. Tilt Off/On You can invert tilt for this device on the
input (manual control) or output (stored
data)
Swap Pan/Tilt Off/On Swap pan/tilt for this device.
Scroller Roll Dropdown
menu
Shows the assigned scroller roll - dropdown
to change. See Scroller Rolls.
Calibration Editor
[MODIFY]
Press MODIFY to open the Calibration
Editor for a specific scroller roll. See
Calibrate Individual Scroller Rolls.
Device Settings - Patching
It is possible to Patch devices directly into the Device Settings tab. You can use any channel selection
to patch fast.
Function Key Feedback
Insert a new
Device
[#] [INSERT]
A new Device is inserted.
Delete the selected
Device
[DELETE]
The selected Device is deleted. You
can only delete one device at a time.
Insert the current
channel selection
as devices
[INSERT]
The current channel selection is
inserted as Devices.
Change template
for multiple
devices
[SELECT]
Use SELECT to select multiple
cells. Select a new template from
the dropdown and press MODIFY *
Change address for
multiple devices
[SELECT]
Use SELECT to select multiple
cells. Enter a start address and press
MODIFY.
Unpatch a device
[0] [MODIFY]
In the Adress cell you can unpatch
the currently selected devices by
entering 0.
*If a template isn't available, use the Import Template Wizard to import it. See Import
Template Wizard.