Manual

Cobalt 7.1 - 20140612
177
Power Off (Quit)
Always shut down your system correctly with the Exit function (BROWSER
>File >Power Off).
Function Key Feedback
1. Open the Browser
[BROWSER]
If it was already selected it
will be closed. Press again
to open.
2. Go to Files Down Arrow Files is highlighted
3. Open subnodes Right arrow Subnodes are opened
4. Select Power Off Down Arrow Power Off is highlighted
5. Confirm Power Off
[MODIFY]
You will get a popup
asking you to confirm, and
exit the system.
NOTE
The current play will be saved to a temporary file called "SAVED.ASC".
This file is loaded automatically the next time the Cobalt is powered up.
Power Loss
ETC recommends use of an external UPS (Uninterruptible Power Supply) to ensure the possibility to
save your data and perform a proper shutdown of the Cobalt system in the event of an external power
loss. The console and the monitor with the Browser should be connected to the UPS.
NOTE
The current play will be saved to a temporary file called "SAVED.ASC".
This file is loaded automatically the next time the Cobalt is powered up.
Always make sure to save a backup to an external media like a USB device. It
is your only protection against an internal hardware failure.