Manual

Cobalt 7.1 - 20140612
101
Reset The System
When you open a new (empty) Play, you can choose to set the patch 1:1. This chapter is a checklist
for resetting the frontpanel and checking the output.
This chapter contains the following sections
• Reset The Console Facepanel
• Check The Output
Before you start, make sure you have loaded a new (empty) Play. See Load a New (empty) Play
Reset The Console Facepanel
To get light you have to make sure the console is reset properly.
Output mode and Grand Master.
Action Console Feedback
1. Enable output Set Output Mode
Switch to ON
Set Grand Master to
Full.