Manual

The menu pages Menu page 4: Basic settings
Alex M
030430-150B
Alex_M_E_150C_A5.doc
– 49 –
Menu page 4: Basic settings
This menu page shows the basic settings for the dimmer system and
allows you to modify them.
Fig. 32: Menu page 4,
Basic Settings
Input/display fields
DMX ADDRESS
DMX start address of the dimmer system
Value range:
Factory setting:
1 to 512 and SINGLE
1
ON DMX FAIL
Behavior if the DMX signal fails
(detected after 2 seconds)
Hold Maintains the current output levels
Memory XX Fades in the stored preset XX
Only effective if DMX + Mem/Chase is
selected as the signal source under INPUT.
Chaser Chaser function active (chase)
Only effective if DMX + Mem/Chase is
selected as the signal source under INPUT.
Blackout Deactivates all channels.
Factory setting: Hold