Manual

Working with Alex M Basic settings
Alex M
030430-150B
Alex_M_E_150C_A5.doc
– 23 –
Further basic settings
Further basic settings can be made on menu page 4, Basic Settings, in the
same way as described in the previous pages:
Setting Entry field
Behavior if DMX signal fails ON DMX FAIL
Fade-in time for the selected auxiliary group if
the DMX signal fails
MEMORY TIME
Minimum value for dimmer control via analog signal
ANA-MIN
Resetting of all preset and chase parameters
CLEAR MEM/CHASE
Fade-in time for intensity increments FU-TIME
Dimmer control on/off DIMMER CONTROL
Maximum output voltage UAMAX
For explanations and selection options: See the section entitled Menu page
4: Basic settings on page 49.
The USG field on menu page 4, Basic Settings, is not an input
field; it merely indicates the operating time in hours.
Weitere Grundeinstellungen