User Guide

ETC Quick Guide
Desire Fresnel
Desire Fresnel Page 6 of 8 ETC
Use Fixture in DMX Mode
After you connect power and data to the fixture and provide DMX, press the
Function button ( ),
use the Intensity encoder to navigate to DMX Mode, and then press the Intensity encoder to select
it. In the DMX screen, you can set the DMX address, DMXmode, and DMXloss behavior.
The DMX screen displays the current DMX values. Press any of the encoders to "wake" the display,
and then press any of the encoders to edit the values. The colors of the encoders correspond to
options on the display. Turn an encoder to modify the corresponding value, and then press the
encoder to save all values on the screen.
DMX
Address
Mode
DMX Loss
1/3 Red
DMX
Address
Mode
DMX Loss
1/3 Red
001
3 Ch RGB
HLL
001
3 Ch RGB
HLL 2 Min
DMX
DMX
Press any encoder to wake the display... ...and then turn an encoder to modify the value in
the matching field. Press an encoder again to save
the value and return to the view-only screen.
DMXModes
Direct Expanded Studio 3 Ch RGB 1 Channel
RDMPersonality ID 
1 2 3 4 5
DMXChannel 
1 Intensity Intensity Intensity Red Intensity
2 Deep Red CCT CCT Green
3 Red Tint Tint Blue
4 Amber Tuning Tuning
5 Lime Mix Strobe
6 Green Red Curve
7 Cyan Green Fan
8 Blue Blue
9 Indigo Strobe
10 Strobe Curve
11 Curve Fan
12 Fan
For complete DMX channel information, scan the QRcode on the first page or visit etcconnect.com to view the full Desire
Fresnel User Manual
.