User's Manual
Table Of Contents
- Introduction
 - Specifications
 - Basic Assembly
 - Installation
 - Adjustments
 - Clean the Lens
 - RDM Values
 
User Manual 3
Specifications
Physical
• Steel yoke with 0.406” (10.3 mm) diameter 
mounting hole
• Rotating shutter assembly ±175°
• E-size gobo pattern holder (included) 1-1/2” 
(37.5 mm) with a 1” (25.4 mm) image area
• IP20 rated
• Zoom range to suit a variety of throw 
distances
• Captive accessory slot for pattern holder 
(included)
• Locking, stainless steel, full hard shutters in 
a tri-plane assembly, 0.40 mm (A301 grade)
• Magnetically held integrated media holder 
for 2.6” (66 mm) diameter color media or 
diffusion or 1.75 mm-thickness dichroic 
glass
• Track-mount fixture: 
- Compatible and ETL-listed for DataTrack 
(EUTRAC) brand track
- DataTrack color matching track adapter 
included
• Portable fixture: 
- C-clamp (included in non-EU markets)
- Optional accessory for Unistrut
®
mounting (order separately, part number 
7191K1000)
• Canopy fixture:
- Can be installed directly on 4” and 
4-11/16” backboxes, or on backboxes 
with round cover plates
- Not for installation on 1-gang backboxes 
or trim rings
Electrical
• Power at full intensity: 20 W (typical), 
24 W (maximum)
• Input voltage options:
- Track-mount and portable: 100–240 V, 
50/60 Hz
- Canopy (0–10 V and DALI): 120–277 V, 
50/60 Hz
- Canopy (DMX): 100–277 V, 50/60 Hz
• Portable fixture: 6 ft power cable hard-wired 
to fixture with mains connector options of 
NEMA 5-15P, Schuko, or UK
• Inrush (first half-cycle) for 0–10 V and DALI 
canopy fixtures:
- 120 V: 2 A
- 240 V: 5 A
- 277 V: 6 A
• Inrush (first half-cycle) for all other fixtures:
- 120 V: 11 A
- 240 V: 24 A
- 277 V: 28 A
• All variants require power from a non-
dimmable source
LEDs
• Cree LED source
- Irideon FPZ 2700 K Gallery: 90+ CRI
- Irideon FPZ 3000 K: 80+ CRI
- Irideon FPZ 3000 K Gallery: 90+ CRI
- Irideon FPZ 4000 K: 80+ CRI
- Irideon FPZ 5000 K: 80+ CRI
• Long-life LED: 70,000 hours L70 lumen 
maintenance
Optical
• Built-in zoom optics 
(25–50 degree field-angle)
• Beam edge continually adjustable 
hard to soft
• Projector-quality, high-contrast lenses
Thermal
• 0°C to 40°C (32°F to 104°F) ambient operating temperature










