User's Manual

User Manual 11
3: Use the hook in the canopy enclosure
to hang the fixture from the
mounting plate while you complete
the fixture wiring.
4: Connect the building ground wire to
the ground wire on the fixture,
following local electrical codes.
5: Connect the supply power wires to the fixture wiring using the included
WAGO
®
connectors.
• For 120 V fixtures: Connect the black wire to line and the white
wire to neutral.
• For 230 V fixtures: Connect the brown wire to line and the blue
wire to neutral.
6: Connect the data wires to the fixture wiring using the included WAGO
connectors.
• For 0–10 V fixtures: Connect the gray wire to data - and the purple
wire to data +.
• For DALI fixtures: Connect the purple wires to data - and data +.
For this structure... ...secure mounting plate using:
4-11/16” backbox Large oval slots (see 1 above)
4” backbox Small oval slots (see 2 above)
Mud ring and round box Circular slots (see 3 above)
2
1
2
1
Mounting plate
(0–10 V and DALI variants)
3
3
Canopy
screw hole
Hook