User Manual

User Manual 1
Introduction
Congratulations on your purchase of the ETC Source 4WRD LED retrofit kit.
Replacing your existing incandescent burner assembly with the Source 4WRD
LED brings a new tool to your lighting inventory. The Source 4
WRD LED
expands the options for existing Source Four
®
fixtures and adds a new white
LED fixture to the ETC family.
The following Source 4
WRD options are available as 80 CRI and 90 CRI (Gallery)
variants:
• Source 4WRD LED retrofit kit: Used to modify an existing Source Four HPL
incandescent fixture to a white LED fixture. The Source 4
WRD LED can
also be used with the Source 4WRD PAR or PARNel
®
Fixture Body to
create a Source 4WRD PAR or PARNel fixture. For more information, visit
etcconnect.com.
• Source 4
WRD Light Engine: Combines the Source Four incandescent
fixture body with the Source 4WRD LED.
Note:
Source 4 WRD LED retrofit kit is not compatible with
Source Four LED, Fresnel, PAR, or jr fixtures.
WARNING:
The Source 4 WRD LED is not user serviceable. Field
modification of the Source 4
WRD LED will void your ETC
warranty.
Source 4WRD LED
retrofit kit shown
installed on a Source
Four fixture