User Manual

12 Source 4 WRD
DMX pinout
User interface
The two-button, seven-segment display shows the DMX address, AC mode, or
the manually-set level.
• Set a DMX address: Use the up and down arrows to navigate to the
desired DMX address number (1–512).
• Set the fixture to AC mode: Use the down arrow to navigate one
number below DMX address 1. The display will read .
• Manually set a level: Use the down arrow to navigate one number
below . The display will read  (Level = Full). Use the down arrow
to decrease the level to a percentage of full ( = 99%,  = 98%,
etc.). You can set levels from 0%–100% (full).
Pin Description Pin Description
1 DMX + 5 Not Connected
2 DMX - 6 Not Connected
3 Not Connected 7 Iso Common (Shield)
4 Not Connected 8 Not Connected
User
interface
Up and down
navigation buttons
RJ45 data
connections