User Manual

EN - 50

If the display flashes

alternately with the heat setting

This means that:

• you have not placed a pan on the correct cooking zone or,

• the pan you're using is not suitable for induction cooking or,

• the pan is too small or not properly centered on the cooking zone.

No heating takes place unless there is a suitable pan on the cooking zone.

The display will automatically turn off after 1 minute if no suitable pan is placed on it.

Finish cooking

1. Touching the heating zone selection control that you wish to switch off .

2. Turn the cooking zone off touching „-“ and going down to 0.

3. Make sure the display shows 0 and than H.

4. Turn the whole cooktop off by touching the ON/OFF control.

5. Beware of hot surfaces H will show which cooking zone is hot to touch. It

will disappear when the surface has cooled down to a safe temperature.

It can also be used as an energy saving function if you want to heat

further pans, use the hotplate that is still hot.

USING THE BOOST FUNCTION

Power boost is a function that increases the power of one zone to a higher value in one

second and lasts for 5 minutes. This will allow you to cook more efficiently and faster.

1. Touch the heating zone selection control , which you want to activate the boost function.

2. Touch the boost control . The zone indicator show P and the power reach Max

• The function can work in any cooking zone.

• The cooking zone returns to 9 after 5 minutes.

• If the original heat setting equals 0, it will return to 9 after 5 minutes.

3. To turn off the function, touch the selected cooking zone , that you wish to switch off the

boost, than touch the boost control . The cooking zone returns to 9.

4. Restrictions when using: The four zones were divided into two groups. In one group, if use

boost on one zone, first make sure that the other zone is working on/below power level 5.

PAUSE FUNCTION

Pause function can be used at any time during cooking. It allows to stop the

induction cooktop and come back to it.

1. Make sure the cook zone is working.

2. Touch the button Pause function

, the cooking zone indicator will show i i . And then

the operation of the induction cooktop will be deactivate within the scope of all cooking

zones, except the Pause function, on/off and lock keys.

3. To cancel the pause status, touch the button Pause function

. then the cooking zone

will go back to the power stage which you set before.

LOCKING THE CONTROLS

• You can lock the controls to prevent unintended use (for example children accidentally

turning the cooking zones on).

• When the controls are locked, all the controls except the ON/OFF

control are disabled.