Datasheet

Thermal Overcurrent Circuit Breaker 1180-...
www.e-t-a.de
1822 3
1
Thermal Overcurrent Circuit Breaker 1180-...
Accessories - Terminal block with screw terminals
8
42.7
33.8
36.4
64.3
Dimensions X 222 233 02
LED
1.33
1.43
1.68
2.53
.315
1
2
5
4
3
6
1 Label for circuit breaker 1180, surface for marking 4.5 x 5 mm
(packaging quantity 120 pcs)
Y 307 374 01
2 Terminal block for DIN rail mounting, with screw terminals
up to 6 mm
2
conductor, width 8.2 mm,
dimensions 64 x 42.5 x 8.2 mm,
headroom over the upper rail edge with circuit breaker fitted
(OFF position) 84 mm.
Approvals: UL File E197598
X 222 233 01
3 Terminal block for DIN rail mounting see item 2,
but with LED DC 24 V (lighted after tripping);
current rating LED 2 mA
Approvals: UL File E197598
X 222 233 02
4 Bus connection for potential bridging of several terminal blocks
see item 2 and 3 (10-pole, separable, mounting hardware
included), max. current rating 34 A
X 222 232 01
5 Insulation barriers for insertion between two circuits
(packaging quantity 10 pcs)
Y 307 373 01
6 Label for terminal block, see item 2 and 3,
surface for marking 8 x 10 mm
(packaging quantity 10 pcs)
Y 307 375 01
Vibration with terminal block X 222 233 01 and
X 222 233 02
5 g (57-500 Hz), ± 0.38 mm (10-57 Hz) to IEC
60068-2-6, test Fc, 10 frequency cycles/axis and
EN 50155
Shock with terminal block X 222 233 01 and
X 222 233 02
25 g (11 ms)
to IEC 60068-2-27, test Ea
This is a metric design and millimeter dimensions take precedence (
mm
)
inch