User's Manual

– 12 – ETAsys.com
Specifications are subject to change without notice.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
ETA-ECS3
Power Sequencer & Conditioner
SPECIFICATIONS
Type PowerSequencer,PowerConditioner&Suppressor
SequencerSections 3,FixedTimeof3SecondsBetween“On”Seq.2&3,“Off”2&1
Load Rating 15A Continuous
Safety Listing ETL (UL 60065 Standard)
Front Panel
AC Outlets 2 Unswitched
Lights 1 Pull out LED with Dimmer Switch
Activation Switch Momentary
CircuitBreaker 15AResettable
AC Mains Voltmeter Three Digits (Digital)
Indicators SequencerSections1,2&3,AbnormalVoltage,ACFault,BreakerOpen,WiringFault
Rear Panel
AC Outlets 7 Total, Sequence Section 1 (3 outlets), Sequence Section 2 (2 Outlets),
Sequence Section 3 (1 outlet), Unswitched (1 Outlet)
External Switch Activation Trigger Momentary Contacts, 2 Position Euro/Phoenix 5.08mm Type Connector
External Voltage Activation Trigger 5-24VDC Continuous, 10mA, 2 Position Euro/Phoenix 5.08mm Type Connector
DC Output 12VDC 100mA Output Paralleled to Sequencer Section 3 Timing
LEDLightSocket XLRSockettoProvide12VDCforOptional16"GooseneckLamp,AP-GNL18
LED Light Switch Two Position On/Off
Grounding Terminal Hand Screw Type Terminal to Chassis Ground
ACMainsPowerCord 9'(3Meters)14-gauge
Technical Data
Current Rating 15 amps
Power Consumption 12 watts
Operating Voltage 102 - 132VAC
High Voltage Surge Protection Trigger at 133VAC, 1ms Typically
Low Voltage Protection Trigger at 101VAC, 1ms Typically
Voltmeter Accuracy ±1.5VAC
Spike Protection Modes DCS (Dual Clamping Suppression) Circuitry on Incoming AC Mains and Each
Sequential Section Output
Min.SpikeClampingVoltage 460VRMS@3,000A
Max. Spike Clamping Voltage 6kV
Max. Spike Clamping Resp. Time 1 nanosecond
SpikeClampingVoltage@100A 1250Vpfor20μs
Maximum Surge Current 6,500A
EnergyRating@2ms 2000Joules
NoiseAttenuationEMI/RFISeq.Section1&2 10dB@10kHz,40dB@100kHz,100dB@10MHz
Temperature Range 5º to 35º C
HumidityRange 5%to95%R.H.
Mechanical
ChassisFinish Black
Mounting Rack Mount, 19", 1 RU
Dimensions Height 1.75" (44.45mm) x Width 19" (482.6mm) x Depth 8.5" (215.9mm)
Weight 7.6 lbs (3.45kg)