User's Manual

– 10 – ETAsys.com
Specifications are subject to change without notice.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
ETA-ECM30
30A AC Power Module Spike Suppressor
ETA-ECM30 SPECIFICATIONS
Type AC Power Module Spike Suppressor
RoHS Compliant Yes
Safety Listings ETL (UL 60065 Standard)
Front Panel
Outlet Single 30A, L5-30
Indicators Active(Green),Fault(Red),IncomingAC(Red)
External Trigger/Manual On Slide Switch
Connectors 5PositionPhoenixEuroBlockStyle
Hard Switch Remote Trigger SPST Contact
Status Signals Output for Voltage (When used with ECM-6RM)
ACMainsInterconnect ScrewTerminalBlock
Technical Data
Current Rating 30A
Operating Voltage 102VAC - 132VAC
Power Consumption 500 milliwatts
Power Requirements 120V 60Hz
ExtremeVoltageShutdown (EVS)Below102Vorabove132VACLine(WhenusedwithETA-ECS6RM)
DCV Remote Trigger 5-24DCV
High Voltage Surge Protection Trigger at 133VAC, 1ms typically (When used with ETA-ECS6RM)
Low Voltage Surge Protection Trigger at 101VAC, 1ms typically (When used with ETA-ECS6RM)
SpikeandSurgeSuppression HottoNeutral,HottoGround,NeutraltoGround
Spike Protection Modes Circuitry on Incoming AC Mains
Min. Spike Clamping Voltage 460 VRMS @ 3,000 amps
Max. Spike Clamping Voltage 6kV
Max. Spike Clamping Resp. Time <1 nanosecond
Spike Clamping Voltage @ 100A 1,250Vp for 20µs
Maximum Surge Current 6,500A
Energy Rating 600 Joules
Temperature Range 5° – 35°C
Humidity Range 5% to 95% R.H.
Mechanical
ChassisFinish Black
Mounting #8
5
⁄16" Self Tapping Screws
Height 3" (76.2mm)
Width 3.5" (88.9mm)
Length 8.5" (215.9mm)
Weight 1.25 lbs (0.68kg)