Specifications

– 15 – ETAsys.com
Specifications are subject to change without notice.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
ETA-20SH
AC Power Conditioning & Suppression Module
ETA-20SH SPECIFICATIONS
Type AC Power Conditioning & Suppression Module
RoHS Compliant Yes
Safety Listings ETL (UL 60065 Standard)
FrontPanel
Outlet Two 20A, Switched
Indicators Active (Green), Fault (Red), Incoming AC (Red)
Manual Override Slide Switch
Connectors 5PositionPhoenixEuroBlockStyle5mmSpacing
Hard Switch Remote Trigger SPST Contact
Status Signals Output for Voltage and Current Data (All signals are low voltage and low current)
TechnicalData
Current Rating 20A
Operating Voltage 102VAC - 132VAC
Power Consumption 500 milliwatts
Power Requirements 120V 60Hz
ExtremeVoltageShutdown (EVS)Below102Vorabove132VACLine(WhenusedwithETA-ECM6RM)
DCV Remote Trigger 5-24DCV
FuseProtection 20A250V3ABSlowBlow(Internal)
PowerCord 9'(3m),12-gaugeNEMA5-20P125VACplug
High Voltage Surge Protection Trigger at 133VAC, 1ms typically (When used with ETA-ECS6RM)
Low Voltage Surge Protection Trigger at 101VAC, 1ms typically (When used with ETA-ECS6RM)
Spike and Surge Suppression Hot to Neutral, Hot to Ground, Neutral to Ground
Spike Protection Modes Circuitry on Incoming AC Mains
Min.SpikeClampingVoltage 460VRMS@3,000amps
Max. Spike Clamping Voltage 6kV
Max. Spike Clamping Resp. Time <1 nanosecond
SpikeClampingVoltage@100A 1,250Vpfor20µs
Maximum Surge Current 6,500A
Energy Rating 600 Joules
NoiseAttenuationEMI/RFISequencer 10dB@10kHz,40dB@100kHz,100dB@10MHz
Temperature Range 5° – 35°C
Humidity Range 5% to 95% R.H.
Mechanical
ChassisFinish Black
Mounting Side bracket adjustable
Height 3" H x 8.5" W x 3.5" D (76.2mm x 215.9 x 88.9mm)
Weight 5.5 lbs (2.49kg)