POWER CONDITIONING UNIT USER MANUAL/WARRANTY BOOK 1
"========================================================================================== DEALER / DISTRIBUTOR SEAL / SIGNATURE: PURCHASE DETAIL (DATE / INVOICE NUMBER): SERIAL NUMBER: MODEL NUMBER: OWNERS COPY: WARRANTY CARD: " DEALER / DISTRIBUTOR SEAL / SIGNATURE: PURCHASE DETAIL (DATE / INVOICE NUMBER): SERIAL NUMBER: MODEL NUMBER: MANUFACTURER COPY ( PLEASE SEND THE SIGNED COPY BACK TO US): 15
Dear Customer, Thank you for deciding in favor of PHOCOS Solar PCU. In doing so you have purchased an innovative, high quality product with unique equipment features and a high constant efficiency. This user manual contains explanations on using the PHOCOS Solar PCU.You will learn to recognize the many possibilities of the Solar Inverter. Information is provided on safety and installation. Please observe the safety precautions exactly to ensure increased safety at the operating site of the PCU.
Disconnect both AC and DC power from the inverter before attempting · The serial number of your product. any maintenance or cleaning or working on any circuits connected to · Information about the installation and use of the unit. the inverter. See note below. · Information about the failure and/or reason for the return. · A copy of your dated proof of purchase. Do not operate the inverter with damaged or substandard wiring.
· · The dated purchase receipt from the original purchase of the product at NOTES: point of sales. 1. Follow these instructions and those published by the battery manufacturer and the manufacturer of any equipment you intend to use in the vicinity of the battery. Review cautionary markings on these products and on the engine. The dated invoice or purchase receipt showing the product exchanged under warranty. 2. This inverter contains components which tend to produce arcs or sparks.
Typical Loads Suitable for Usage:- Maintenance and Service: Ø · CFL Lamp · Incandescent Lamp · Fluorescent Lamps supply (building wiring socket outlet), components inside the PCU · Table Fan/ Ceiling Fan system are still connected to the battery and are still electrically live and · TV dangerous. · Computer To reduce risks of electric shock, disconnect all wiring before cleaning. Always maintain caution during maintenance & service.
System Output Condition When the Battery is charged fully , System output will be automatically change over to UPS mode, and resume back only by 11.5V±0.2V/23V±0.2V when PV is available. Charging priority Battery is always charged through Solar as priority.
Ø Switch on the PCU by operating switch in front panel to Inverter Mode and ensure the Display as in Pic 1. Ø Connect AC Mains cable with AC Grid source and ensure the display as in pic 2 and please do not feed the output of the PCU as the input to PCU again as it will lead to malfunction of the unit. NOTE: In the case generator AC power ensure that the frequency and voltage regulation within the limit otherwise PCU will lead to malfunction. ** Ø UPS ON LOAD MPPT ON BAT – XX.
