Installation Sheet

PRODUCT NAME: Blocs

ITEM NUMBER: E32033-18PC

PRODUCTS ARE NOT INENDED

FOR COMMERCIAL USE.

MADE IN CHINA

Page 1 of (3)

Please consult your electrician for hanging fixture and wiring.

Conte mporary

Lighting

Bulbs (Included): 3*2.2W G9LED

This fixture is designed to dim withan

Electronic Low Voltagedimmer.

Dimming levels will vary by dimmer.

Below is a List of Recommended Dimmers:

·Lutron MACL-153M

·Leviton IPL06-10Z

Due to inrush current, wattage should not

exceed 150 Watts of product for a 600 Watt

dimmer.

Warning!This fixture is supplied with an installed

LED driver.These fixtures are dimmable using

standard triac dimmer.For best operation we

recommend using Lutron CL Dimmers.

PAGE 1
Conte mporary Lighting TM PRODUCT NAME: Blocs ITEM NUMBER: E32033-18PC Please consult your electrician for hanging fixture and wiring. This fixture is designed to dim with an Electronic Low Voltage dimmer. Dimming levels will vary by dimmer. Below is a List of Recommended Dimmers: · Lutron MACL-153M · Leviton IPL06-10Z Due to inrush current, wattage should not exceed 150 Watts of product for a 600 Watt dimmer. Warning!This fixture is supplied with an installed LED driver.
PAGE 2
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation (A) Mounting Bracket (B) Anchor Bolts (C) Screws (E) Socket ring (D) Acrylic (F) Socket Wrench (G) bulbs Locate all hardware & components before discarding packaging 1.) Step.1: Remove mounting bracket (A) and install to electtical box.Mark where anchors meets the wall, remove mounting bracket from the wall, and then drill holes using 3 16" drill bit where marked(B).
PAGE 3
Conte mporary Lighting TM Model E32033-18PC Crystal Diagram A:3pcs EGLS22030-18 Page 3 of (3)