Installation Sheet

A
B
A
B
c
c
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation
Locate all hardware & components before discarding packaging
Cleaning & Care:
Page 2 of (2)
Clean with soft cloth and a mild detergent.
Do not use abrasive cleaner.
2.)
Step.1:
1.)
3.)
Remove mounting bracket (A) from
fixture and install to electrical box.
Step.2:
Step.3:
Adjust wire length to desired mounting
height, and tighten strain relief screws to
secure.Install fixture to bracket and
tighten screws at the ends of the canopy
to secure.
Wire fixture to wires in outlet box.
Copper wire is for Ground.