Installation Guide - Black

PAGE 1
]2 Contemporary Lighting PRODUCT NAME: Traverse ITEM NUMBER: E21519-CHP Please consult your electrician for hanging fixture and wiring, The fixture is designed to dim with a standard Due to inrush current wattage should not exceed 150 watts of product for a 600 watt dimmer, ‘Warning! Wires need to be connected to driver found in canopy and should not be connected directly to power source or a short may occur.
PAGE 2
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation Locate all hardware & components before discarding packaging 1) Step.1: Remove mounting bracket from fixture and install to electrical box using screws (C). Mark where screws at ends of bracket (A) meet the from ceiling. Drill holes using 3/16" drill bit where marked. Install mounting bracket (A) to outlet box by attaching anchors (B) to secure bracket at ends. Step.