Contemporary Lighting™ Z PRODUCT NAME:Flute LED 23-Light Pendant ITEM NUMBER: E10020 Please consult your electrician for hanging fixture and wiring. WARNING: Wires need to be connected to driver found in canopy and should not be connected directly to power source or a short may occur. The fixture is designed to dim with a standard Traci forward phase dimmer. Dimming levels will vary by dimmer.
IMPORTANT: Tum off the power at the main fuse or circuit breaker box before starting installation Ee omg Setscrews Mounting Setscrews Locate all hardware & components before discarding packaging Ls 2 NEE st 1c lm Cleaning & Care: You may use talcum powder and a soft cloth for cleaning.Do not use abrasive cleaner. Step 1:Remove mounting bracket from fixture and Install to electrical box. _2 \ L) Black/Positive Green/Ground Step 2: Adjust wires to desired mounting height. Wire fixtures to wire in outlet box.
Upward View Please follow tube position as drawing arrangement GO-Golden PC-Chrome GR-Rose golden BK-Black Please check the number wire and tube to find correct pipe for install L12=L12" L24=L24"
Pendant Wires Driver Wires Pendant Inner Wire Outer Mesh () Driver Driver Red Driver Black If wires are cut in the process of adjusting the height, please note the pendants consist of an outer mesh wire(ground) and inner(live) wire that must be separated before re-joining with the driver output wires. Pendant are wired in series to the drivers, as shown below LED-D50V-350 LED-D40V-350 LED-D40V-350 LED-D40V-700 LED-D40V-700 TAXIWAY. LL 4AX4W.. LL AX. ..3XTV.
Dual Plastic Wiring Instructions Sip the con plastic off the Exposed the mash wie dnd tha panda it statistical wie Ini wire, Pull the: mesh wire died to locate he Polemic The ws wis ie Idiom, cone inner wires The inner sired also trove ng He mesh wie fores io he photocopier coat had mesh do ibe Black word final the earwig do the ed speed: wires: (fives):
