2 Contemporary Lilghting™ PRODUCT NAME:Flute 35-LT LED Pendant ITEM NUMBER: E10017 Please consult your electrician for hanging fixture and wiring. T ———1 WARNING: Wires need to be connected to driver found in canopy and should not be connected directly to power source or a short may occur. The fixture is designed to dim with a standard Traci forward phase dimmer. Dimming levels will vary by dimmer.
IMPORTANT: Tums off the power at the main fuse or circuit breaker box before starting installation Setscrews Bracket Mounting Setscrews Locate all hardware & components before discarding packaging fixture and install to electrical box. BqL Step 1:Remove mounting bracket from /< —(L) Blacktopping 2) Green/Ground [ Step 2:Adjust wires to desired mounting height. Wire fixtures to wire in outset box. Refer to dual plastic wire instructions to connect low voltage wire to driver.
Please follow tube position as drawing arrangement Upward View Ors (eo @ Orc L5 154 154 GO Golden RG Rose golden PC Chrome BK Black Please check the number wire and tube to find correct pipe for install. D1 D2 = Medium = 4W D3 = Wide = 92.
Pendant Wires Driver Wires Pendant | Driver Inner Wire | preferred Outer Mesh privet Black(-} If wires are cut in the process of adjusting the height, please note the pendants consist of an outer mesh wire(ground) and inner{live) wire that must be separated before re-joining with the driver output wires.
