Specifications

Basic System Administration
182 VMware, Inc.
To change the SCSI device configuration
1ClicktheHardwaretab.
2 SelecttheSCSIdeviceinthehardwarelist.
3Toconnectthisvirtualmachinetotheserver’sSCSIdevicewhenthevirtual
machineispoweredon,selectConnectatpoweron.
4UnderConnection,selectthephysicaldeviceyouwanttouse.
UnderVirtualdevicenode,selectthevirtual
devicenodewhereyouwantthis
devicetoappearinthevirtualmachine.
5ClickOKtosaveyourchangesandclosethedialogbox.
To change the virtual disk configuration
1ClicktheHardwaretab.
2ClicktheappropriateHardDiskintheHardwarelist.
3Usethedrop‐downmenutochangethevirtualdevicenode.
4Forindependentmode,whichis
unaffectedbysnapshots,selectthecheckbox.
ThenchoosePersistentorNonpersistentmodetodeterminethepersistenceof
changes.
5ClickOKtosaveyourchangesandclosethedialogbox.
To change the memory configuration
1ClicktheHardwaretab.
2ClickMemoryintheHardwarelist.
3Adjusttheamountofmemoryallocatedtothevirtualmachine.
(S EE U PDATE ) Therangeofmemorysupportedis128MBto16384MBandisnot
limitedtothephysicalmemoryofthehostwherethevirtualmachineresides.
4ClickOKtosaveyourchangesandclosethedialogbox.
N
OTETheManagePathsfeatureforRDMdisksisnotavailableforvirtualmachines
onlegacyhostsrunningversionsofESXServerpriortorelease3.0.