manual

ESTOS CallControlGateway 4.0.0.21648
9
2.3 Configure Office Communicator 2005
The Microsoft Office Communicator contacts the ESTOS CallControlGateway over
the Live Communications Server (LCS). You have to enable and set the remote call
control for every Office Communicator user.
The following information is required for every user
1. SIP URI of the ESTOS CallControlGateway
The URI of the ESTOS CallControlGateway must be the same as the configured URI in the LCS. See
also Configure Live Communications Server.
2. TEL URI of the user's telephones
The TEL URI of the user's phone has to match the telephone number of a line in the line configuration.
This can be, e.g., tel:[phone] or tel:177.
Activate the telephone integration
To activate the phone integration at the Office Communicator, you have to set a
registry key. Set a REG_DWORD key, name of the key to 'EnablePhoneControl' in
'HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Communicator' and the
value to '1'. The key can be created if it doesn´t already exist.
After restart of the Office Communicator, open the dialog 'Options' at the menu. With
the Accounts tab you can activate phone integration.
Configuration of the user in the Active Directory
The user's remote call control can be configured in the Active Directory. If the ESTOS
CallControlGateway has a connection to the Active Directory, a user authorization
can be carried out for one phone.
 Launch Active Directory user and Directory computer.
 Open the user's properties.
 Click the tab Live Communications to advanced settings.
 Activate the check box Enable Remote Call Control.
 Type in the TEL URI of the CallControlGateway. For example tel:[phone] or tel:177.
 Type in the SIP URI of the ESTOS CallControlGateway. For example sip:[e-mail]
Alternative user configuration on a single workplace
You are also able to configure the user's remote call control directly at the user's
workplace. In this case, the user's authorization has to be deactivated in the ESTOS
CallControlGateway.
 Configure telephone integration
Choose 'Manual configuration' and click on 'Configure'.
Type in the SIP URI of the ESTOS CallControlGateway. For example sip:[e-mail]
Type in the TEL URI of the CallControlGateway. For example tel:[phone] or tel:177.
 Log off and log on again
The changed settings come into effect after logoff and logon again.