manual

ESTOS CallControlGateway 4.0.0.21648
38
Icon
Statement
This line could be opened by the CallControlGateway and is available via TAPI.
This line could not be opened by the CallControlGateway and is not available via TAPI. Check the
functionality of your Tapi driver.
This line is not in use. The terminal device has been physically disconnected and is therefore not
connected to the phone system. This line cannot be used.
Line has not yet been initialised.
6.9 Services
The service settings are to be found in this chapter.
6.10 CallControlGateway Settings
The Remote Call Control Gateway makes telephone integration possible for
Microsoft LCS, OCS, Lync and Microsoft Office Communicator.
The CallControlGateway is a SIP User agent, which makes the CTI functions
available for the Office Communicator over uaCSTA.
Activate CallControlGateway
If the CallControlGateway is activated, the services are available at the
declared port.
TCP port (Default for LCS and OCS)
The CallControlGateway normally uses port 5070. If no further SIP server is
used on this PC you can also use the port 5060 (SIP standard).
TLS Port (Default for Lync)
The CallControlGateway may be operated using TLS/MTLS. The
CallControlGateway normally uses TLS port 5071. If no further SIP server is
used on this PC you can also use the port 5061 (SIP standard).
For using TLS (Transport Layer Security) you need a certificate for server
authentication. See also Server Certificate.
IP Interface
You may bind the IP Services on a specific IP Interface. This is important if the
ESTOS CallControlGateway is running on the same Computer as the LCS or
OCS.
Domain filter
In this field you may enter a list of domains. The CallControlGateway will
answer to requests from these domains. If the list is empty, the
CallControlGateway answers to requests from all SIP users.
If you enter for example 'estos.com;cti.de', the CallControlGateway will
respond only to requests from users whose URIs end with estos.com or cti.de.