manual

ESTOS CallControlGateway 4.0.0.21648
35
6.6.16 Advanced
Phone number formatting
This option determines the phone number format for outgoing calls from the
PC. Phone numbers are transfered in this format from the PC to the phone
system.
 Dialing rules apply
This is the standard setting. Phone numbers are always formatted by the PC according to
the dialing rules.
 Always uses international format per ITU E.164
The PC always converts phone numbers into the super-canonical phone number format (e.g.
[phone]) before they are sent to the phone system. Only activate this option, if your
phone system and the Tapi drivers upports this phone number format.
 Do not use international format (mixed E.164 or users' preference)
All phone number are pre-formatted on the PC. Only special symbols will be deleted before
sending the number to the phone system. Only activate this option if your phone system and
TAPI driver support this number format.
 Format according to users' preference, Recommendation E.164 with formatting
Phone numbers that can be dialed are pre-formatted on the PC only and sent directly to the
phone system. International number formatting (E.164) will applied before transmission to
the phone system.
6.6.17 Vanity phone numbers
Resolve vanity numbers:
Here you can define whether you wish to use vanity numbers. Enter the dialing
code which is to be used for vanity numbers.
What is a Vanity number?
The impression of letters on the phone keypad opens up the possibility of
requesting numbers whose alphanumeric transformation produces a specific
name or concept. This is then called a "vanity" number. "Vanity" numbers can
be used in various partial ranges (0700, 0800, 0180...). they are therefore phone
numbers which are written as text. An example is 0800HANSMEIER.
Enter vanity dialing codes here without national codes; e.g. 700, 800.
6.6.18 Check dialing rules
Here you can check the dialing rules. Enter a phone number and observe which
phone number is actually sent to the phone system after application of the
dialing rules.
6.7 Error handling
Settings for special situations which only occur under special circumstances
and with certain phone systems can be set up here.
Tapi LINE_REINIT report
The reaction of the ESTOS CallControlGateway to a LINE_REINIT report can be
set up here. This report can be caused by a Tapi driver without implemented
trouble shooting (e.g. for loss of connection to the PBX system). These
settings are especially necessary for Panasonic devices.
Line cannot be initialized
ESTOS CallControlGateway's reaction to unavailable lines on startup can be